--- OBSOLETE: outdated by jacks.txt 7/14/1998

From: "Rued, Jenine" <jrued@csuchico.edu>
To: "'Pythagoras Watson'" <py@ecst.csuchico.edu>
Subject: RE: New OCNL Wiring Work Order
Date: Fri, 19 Jun 1998 09:39:12 -0700

Thank you for your service request.  Work order #8-2085 has been opened.

> There is a CAF for new OCNL network wiring.  This is its accompaning
> work order.  The following needs to be changed and is in order of
> highest to lowest priority.  An accompaning graphic is available at:
>   http://www.ecst.csuchico.edu/~py/OCNL-network/
> 
> 1) 2nd Floor Wiring Closet
>    -----------------------
>    Install Cisco 3200 hub (needs up to 10 patch panel ports)
>    Install four Cisco 1924 hubs (needs up to 104 patch panel ports)
> 
> 2) OCNL 251
>    --------
>    West wall (26 jacks):
>      From: Jacks P1-P6, 256-257, Q1-Q6, R1-R6, S1-S6
>      To:   New hubs in 2nd floor wiring closet
> 
> 3) OCNL 127
>    --------
>    South wall (19 jacks):
>      From: Jacks B1-B6, C1-C6, D1-D6, 150
>      To:   New hubs in 2nd floor wiring closet
> 
> 4) OCNL 241 / OCNL 131
>    -------------------
>    East wall of OCNL 131 (1 jack):
>      Swing jack 1020 to jack D1 on South wall of OCNL 241
>        (the other end will still terminate in OCNL 255
>         patch panel port 3#24)
> 
>    East wall of OCNL 131 (1 jack):
>      Clean up (pull both ends) of jack 1021
> 
>    South wall of OCNL 241 (1 jack):
>      Clean up (pull both ends) of jack 2000
>        (the other end currently terminates in OCNL 255
>         patch panel port 3#14 which will be changing (see below))
>
> 5) OCNL 255
>    --------
>    Patch panel 3 (3 jacks):
>      From: Ports 14-16
>      To:   New hubs in 2nd floor wiring closet
> 
>    Patch panel 4 (26 jacks) (from OCNL 133):
>      From: Ports 1-8, 11-18, 21-28, 31-32
>      To:   New hubs in 2nd floor wiring closet
>        (Pull these ports back in to the 2nd floor wiring closet to connect
>         to new hubs.  In other words, these connections from jacks in
>         OCNL 133 are now going to go directly to the hubs.  The remaining
>         ports on patch panel 4 should be compressed down in the following
>         manner:
> 
>           Old New    Old New    Old New    Old New    Old New
>           --- ---    --- ---    --- ---    --- ---    --- ---
>           9   1      10  2      19  3      20  4      29  5
>           30  6      33  7      34  8      35  9      36  10
>           37  11     38  12     39  13     40  14
>        )
> 
>    Patch panel 4 (15 jacks):
>      From: Ports 25-39
>      To:   New hubs in 2nd floor wiring closet
> 
>    Patch panel 5 (4 jacks):
>      From: Ports 7-10
>      To:   New hubs in 2nd floor wiring closet
> 
> 6) OCNL 436
>    --------
>    North wall (2 jacks):
>      Swing jack 4042 to Student .2 MMAC (line 15)
>      Swing jack 4043 to new hubs in 2nd floor wiring closet
> 
> 7) OCNL 233
>    --------
>    North wall (1 jack):
>      Swing jack 2033 to new hubs in 2nd floor wiring closet
>    
> 8) OCNL 211
>    --------
>    North-west wall (1 jack):
>      Swing jack 2110 to new hubs in 2nd floor wiring closet