ECE 186 Labels
The following labels were painstakingly created by Mark Miliano (www.ecst.csuchico.edu/~mmiliano). Send him a thank you note at mmiliano@ecst.csuchico.edu if you appreciate his work.
NOTE: Make sure that the pin outs contained
within this and other related documents are the correct pin outs for the chips
you are using; you can do this by comparing the actual pin values seen within
this and other documents with that of the schematics obtained from your device
manufacturer via the Internet. Another way to find the proper schematics for
your device is to go to www.questlink.com
and search for the part. If you are not using the same pin out, you can edit
these docs by double clicking on any given value and re-typing another value in
its place using Microsoft Word.
The notch on the pinouts of the PLCC should match the notch on your chip.
