# MTU settings will greatly effect your performance, please read up 
# on calculating MTU settings from my PPP web page.                 
#                                                                   
# This setup is optimized for file transfers and NOT for interactive
# traffic like telnet, talk, etc			            	
#
# 	14.4k modem users: 						296  
#	28.8/33.6k modem users: 				470  
#   IP Masq users (regardless of speed): 	1500		    


# Masq users: If you get a lot of "MASQ: failed TCP/UDP checksum for 
#             xxx.xxx.xxx.xxx" errors, turn off VJ header compression
#	      by do the the following:
#
# -vj

#pppd v2.3.x PAP config
require-pap

#Get a dynamic IP address.  If you have a static IP addres, put
# the static IP address in the LEFT hand address space
0.0.0.0:0.0.0.0
asyncmap 0
lock
crtscts
#BSDComp is a more modern compression method than "deflate" 
bsdcomp 15,15
lcp-restart 1
ipcp-restart 1
defaultroute

#Enable these for debugging
#debug
#kdebug 1

user your-ppp-username